Every pump we supply
Filter the full catalogue by manufacturer, type, industry and duty. Find the pump that fits, then send it to our engineers to confirm before you buy.
64 pumps. Filter and sort them by manufacturer, category, industry or duty.
- Alfa LavalAlfa Laval DuraCirc
A hygienic circumferential piston pump for low-viscosity duties that need pressure. Certified to EHEDG and 3-A, in 13 displacements.
- Alfa LavalAlfa Laval LKH UltraPure
A high-purity hygienic centrifugal pump for biotech and pharmaceutical process duties. EHEDG certificate, full material traceability, eight sizes.
- Alfa LavalAlfa Laval MR
A liquid-ring pump for CIP return and other duties where the liquid arrives with air or gas in it. Three sizes to 80 m³/h.
- Alfa LavalAlfa Laval OptiLobe
Alfa Laval's cost-effective hygienic rotary lobe pump, in 10 displacements to 77 m³/h and 8 bar, with an all-stainless exterior.
- Alfa LavalAlfa Laval SolidC
A standardised hygienic centrifugal pump for basic CIP and transfer duties, in four sizes, with an UltraPure execution for pharmaceutical work.
- Alfa LavalAlfa Laval SRU
Alfa Laval's hygienic rotary lobe pump for shear-sensitive and viscous product, in 12 displacements to 106 m³/h and 20 bar.
- Alfa LavalAlfa Laval SX
Alfa Laval's premium hygienic rotary lobe pump, in 14 displacements to 115 m³/h and 15 bar, with a fully drainable pump head for CIP and SIP.
- HidrostalAxial Column Pump
Hidrostal Axial Column Pump: 6–1500 l/s at discharge heads up to 20 m, screw centrifugal impeller, for land drainage and flood pumping stations.
- HidrostalAxial Diffuser Pumps
Hidrostal Axial Diffuser Pumps in two versions, the Axial Column Pump at 6–1500 l/s and up to 20 m, and the high-head Vertical Turbine Pump.
- HidrostalBearing Frame Pumps
Hidrostal bearing frame pumps: dry-installed screw centrifugal end suction, 0.5–3000 l/s to 90 m, 32–700 mm, horizontal or vertical. Specs and selection.
- CalpedaCalpeda BNM(S)
Calpeda BNM, BNMS, BNM4 and BNMS4 are the bronze versions of the NM, NMS end suction range, on EN 733 dimensions and rated to 10 bar.
- CalpedaCalpeda CT, T, TP
The Calpeda CT, T and TP are peripheral pumps: 3–165 m of head at 0.06–6 m³/h from one turbine impeller. Clean liquids only. Specs, sizes and UK supply.
- CalpedaCalpeda e-idos
Calpeda e-idos pumps carry the pressure transducer and control on board. MÈTA, E-MXP, E-NGX and E-MPS, to 8 m³/h and 66.5 m per pump.
- CalpedaCalpeda GM 50
The Calpeda GM 50 is a cast iron submersible sewage pump. The GMC single-channel impeller passes 45 mm solids, the GMV free-flow vortex 50 mm.
- CalpedaCalpeda GQG
The Calpeda GQG cuts rag, paper and textile at the inlet and pumps it, giving 25 m of head on a DN32 line from 0.9 to 1.5 kW.
- CalpedaCalpeda GQN
The Calpeda GQN is a cast iron submersible sewage pump with a channel impeller, passing 50 mm solids to 48 m³/h and 16.4 m on a G 2 discharge.
- CalpedaCalpeda GQR
The Calpeda GQR is a submersible drainage pump with an open impeller and a stainless strainer, passing 6 or 10 mm solids to 52 m³/h and 30.2 m.
- CalpedaCalpeda GQS
The Calpeda GQS is a submersible sewage pump with a free-flow vortex impeller, passing 40 or 50 mm solids to 36 m³/h and 15 m on a vertical port.
- CalpedaCalpeda GQV
The Calpeda GQV is a free-flow vortex submersible sewage pump for rag and fibre, passing 50 or 65 mm solids to 57 m³/h, from 0.55 to 2.6 kW.
- CalpedaCalpeda GX 40
The Calpeda GX 40 is an AISI 304 submersible drainage pump passing 35 mm solids, built with a two-passage GXC impeller or a free-flow vortex GXV impeller.
- CalpedaCalpeda GXR
The Calpeda GXR is an AISI 304 submersible drainage pump with an open impeller, in two frames reaching 19.2 m and 30 m³/h on 12 mm solids.
- CalpedaCalpeda GXV 25
The Calpeda GXV 25 is an AISI 304 submersible pump with a free-flow vortex impeller, passing 25 mm solids to 13.2 m³/h and 10 m of head.
- CalpedaCalpeda MXH
The Calpeda MXH is a WRAS approved horizontal multistage stainless steel pump for clean water to 66 m³/h and 97 m. Specs, sizes and UK supply.
- CalpedaCalpeda NM
The Calpeda NM is a close-coupled EN 733 end suction pump for clean water to 240 m³/h and 93.8 m on 0.55–22 kW motors. Specifications, materials and UK supply.
- CalpedaCalpeda NM4
The Calpeda NM4 is the four-pole close-coupled EN 733 end suction pump for clean water, to 330 m³/h and 36.6 m on 0.37–15 kW motors at 1450 rpm.
- CalpedaCalpeda NMS
The Calpeda NMS is an EN 733 end suction pump on a stub-shaft bracket that takes a standard motor, to 300 m³/h and 95 m on 0.75–75 kW. Specs and UK supply.
- CalpedaCalpeda NMS4
The Calpeda NMS4 is the four-pole stub-shaft EN 733 end suction pump for clean water, to 660 m³/h and 61.6 m on 0.75–90 kW standard motors at 1450 rpm.
- CalpedaCalpeda SD
The Calpeda SD is a multistage submersible borehole pump for 4 and 6 inch wells, reaching 691 m and 40.2 m³/h on 0.37 to 37 kW.
- HidrostalCompact Pumps
Hidrostal compact pumps: portable screw centrifugal field units, 0.8–24.6 l/s to 17.7 m, 50–75 mm free ball passage, from 23 kg. Specs and selection.
- EbaraEbara 3D series
The Ebara 3D series is an EN 733 standardised cast iron end suction pump for clean water to 138 m³/h and 70 m. Specs, seal options and UK supply.
- EbaraEbara 3M series
The Ebara 3M series is the monobloc build of Ebara's AISI 304 stainless EN 733 end suction pump. Sizes, seals, single-phase options and UK supply.
- EbaraEbara 3S series
The Ebara 3S series is the rigid-coupling build of Ebara's AISI 304 stainless EN 733 pump, driven by a standard IEC motor, with an ATEX 3SF version.
- EbaraEbara BEST 2
The Ebara BEST 2 is the 0.55 kW frame of the stainless BEST 2-5 range, running to 15.6 m³/h and 13.1 m of head with a 10 mm solids passage.
- EbaraEbara BEST 3
The Ebara BEST 3 is the 0.75 kW frame of the stainless BEST 2-5 sump range, running to 16.8 m³/h and 14.6 m of head with a 10 mm solids passage.
- EbaraEbara BEST 4
The Ebara BEST 4 is the 1.1 kW frame of the stainless BEST 2-5 sump range, running to 19.8 m³/h and 18 m of head, and the largest one built single-phase.
- EbaraEbara BEST 5
The Ebara BEST 5 is the 1.5 kW three-phase top frame of the stainless BEST 2-5 sump pump range, running to 21.6 m³/h and 19 m of head.
- EbaraEbara BEST ONE
The Ebara BEST ONE is an AISI 304 submersible drainage pump for clear water, 1.2–10.2 m³/h to 8.3 m, passing 10 mm solids or 20 mm on the VOX build.
- EbaraEbara ChopX
The Ebara ChopX cuts and pumps in one unit. Two cutting stages, a hard metal wet end, and a flushless seal option, for scum, FOG, sludge and manure.
- EbaraEbara DKE
The Ebara DKE is a cast iron submersible wastewater pump with a back-swept anti-clogging impeller. It covers 4.2–780 m³/h and 3–44 m at 50 Hz.
- EbaraEbara DRD
The Ebara DRD is a cast iron submersible wastewater pump with a two- or three-channel impeller, in 2, 4, 6 and 8 poles at 50 Hz. Specs and UK supply.
- EbaraEbara DW
The Ebara DW is an AISI 304 submersible sewage pump passing 50 mm solids, to 54 m³/h and 20 m, with a single-channel or vortex impeller.
- VogelsangEP series
Vogelsang EP series rotary lobe pump: continuous differential pressures to 18 bar, media to 200°C, with API 682 and ATEX-compliant options.
- VogelsangFX series
The Vogelsang FX series FarmerPump in six sizes, FX116-60 to FX116-360, up to 270 m³/h and 8 bar, and how to size one for a liquid manure duty.
- GrundfosGrundfos CR
Inline vertical multistage centrifugal pump, cast iron and AISI 304 stainless, for non-corrosive liquids at high head.
- GrundfosGrundfos CRE
Vertical multistage pump with an MGE E-motor, so the speed control and the motor protection are inside the terminal box rather than in the panel.
- GrundfosGrundfos CRN
The full stainless build of the CR inline multistage pump, in AISI 316, for industrial liquids and treated water.
- GrundfosGrundfos SE
A sewage pump that works submerged or dry-installed, because a cooling jacket cools the motor instead of the surrounding liquid.
- GrundfosGrundfos SEG
A submersible grinder pump that cuts sewage at the inlet, so a pressurised system can run on a small-bore rising main.
- GrundfosGrundfos SEV
A submersible sewage pump with a free-flow impeller that passes solids up to 100 mm whole, wet- or dry-installed.
- GrundfosGrundfos SL
A wet-well sewage pump in two impeller builds, the SL1 with an S-tube impeller and the SLV with a SuperVortex free-flow impeller.
- GrundfosHydro MPC
The Grundfos Hydro MPC is a packaged clean-water booster set: 2–6 stainless CR/CRE pumps and a CU 352 controller, flow to 725 m³/h, head to 145 m.
- HidrostalImmersible Pumps
Hidrostal immersible pumps: 0.5–3000 l/s to 90 m head, closed-loop motor cooling so they run dry, part or fully submerged. Dry pit specs and selection.
- VogelsangIQ series
The Vogelsang IQ series rotary lobe pump in two models, IQ112 and IQ152, to 154 m³/h and 7 bar, with a one-piece housing that opens in the pipe.
- VogelsangLoadMaster
The Vogelsang LoadMaster rotary lobe pump for tank vehicles: up to 45% lighter and 20 cm shorter than a standard VX, to 8 bar and 6,030 l/min.
- Penn ValleyPenn Valley Double Disc
A seal-less reciprocating pump for sludge, slurry and rag-laden media, in seven sizes from 9 to 250 m³/h.
- VogelsangR series
The Vogelsang R series rotary lobe slurry pump in two ranges, R116 and R136, to 5,000 l/min and 5 bar, with the full size list and where each fits.
- VogelsangRotaCut
The Vogelsang RotaCut macerates fibre and coarse matter against a cutting screen and traps stones and metal upstream, protecting the pump behind it.
- RotoRoto RD series
Roto's small-capacity progressive cavity range, for metered dosing and transfer of thick, solids-laden media.
- RotoRoto RL series
Roto's extra-large-capacity progressive cavity range, on extended geometry, built for volume at low pressure.
- RotoRoto WM
Roto's wide throat progressive cavity pump, with an auger on the coupling rod for media that will not feed themselves into a standard suction.
- HidrostalSubmersible Pumps
Hidrostal submersible pumps: up to 2500 l/s and 100 m head, screw centrifugal hydraulics, motor cooled by the liquid it sits in. Specs and selection.
- VogelsangVX series
Flow, pressure and build options for every model in the Vogelsang VX series rotary lobe pump range, VX100 to VX230, and how to specify one for your duty.
- VogelsangVY series
Flow, pressure and build options for the Vogelsang VY series rotary lobe pumps, VY100 and VY136, and how the one-piece CIP/SIP housing differs from the VX.
- VogelsangXRipper
Vogelsang's twin-shaft wastewater grinder, in four series covering 50 to 7,164 m³/h, inline in a pipe or lowered into an open channel.